What are the hardware tools?

2023-03-14

What are the hardware tools? 

Commonly used hardware tools can be divided into hand tools, power tools.

Electric tools: electric drill, electric hammer, electric Angle grinder, impact drill, sander, electric rivet gun, electric scissors, heat gun, etc.

Hand tools: wrench, pliers, screw screwdriver, hammer, chisel, axe, knife scissors, measuring tape, etc.

Screwdriver

This is the most used, usually screw a screw, install computer, furniture are very good, usually have a thin wedge head, can be inserted into the screw head slot or notch. 

There are two main types: a word and a cross. There are also common hexagonal screwdrivers, including inner and outer hexagonal two kinds.

Wrench

Wrenches are basically divided into two kinds, dead wrenches and adjustable wrenches, using the lever principle to turn bolts, nuts, screws and other threads, usually at one

 end of the handle or both ends of the system with a clamp, in use along the screw rotation direction in the handle to apply external force, you can turn bolts, nuts, etc.

Tape measure

Can test the length, width, height of the object, sometimes space is limited, to buy things must be in accordance with the size, so through the measuring tape can measure the

 length of the object, width, conducive to the purchase of furniture when the size of the choice, avoid the size caused by the trouble of return.

Hammer

The most common percussion tool, consisting of a hammer head and a hammer handle, is used to hammer nails, straighten or crack objects open. When applying the hammer, 

it is necessary to see whether the connection between the hammer head and the hammer handle is firm, otherwise it will be injured. Be careful when using the hammer, do not hit 

the hand.

Electric test pen

Also called a test pen, used to test whether there is electricity in a wire. When using the test pen, be sure to touch the metal part of the end of the test pen with your hand, the index

 finger against the cap end of the pen, thumb and middle finger, ring finger gently pinch the pen, insert the metal tip into the socket hole.

Pliers

Pliers can be used instead of hands to handle some sharp, sharp implements, such as removing nails from boards, pulling glass from cracks in walls, useful and prevent hands from 

being cut. There are many kinds of pliers, such as wire pliers, needle nose pliers, oblique nose pliers, round nose pliers and so on.

Hacksaw

Commonly known as the hand saw, can cut small size round steel, Angle steel, flat steel and workpiece, can also be used to saw cut small pieces of wood, plastic products, etc. In 

general use, the adZ will be installed toward the front of the installation, but if it is found that the adz is easier to use, the adz will be installed toward its own direction.

Generally, some hardware tools are prepared at home. In decoration and daily life, changing bulbs, making a shelf, dealing with raised nails and other repairs are often used. The frequency of use is very high, and there is no need to find special repairmen.